Price list of plate heat exchangers
Prices of the most commonly used stainless steel plate heat exchangers. Let you use online calculator to determine appropriate size of water/water BPHE unit. Indicative capacities of more common SWEP heat exchangers are listed in the table.
We provide you with professional calculation and optimal design for your project.
We usually deliver commonly used units within one week. Special and custom units are usually manufactured and delivered in 5 weeks from order. We provide quantity and customer discounts.
Insulations for BPHEs
Prices of plate heat exchangers (prices of other models on request). All prices are shown without VAT.
[2–40 kW] The compact plate heat exchanger SWEP E5 (E5T, E5TH, E5AS, IC5) is extremely efficient and thus price-wise. Also the start and end plates participate in the heat exchange. Used in gas boilers for domestic hot water heating (DHW) or for solar heating systems. This exchanger is short and therefore has very small pressure losses. Serves as a replacement for Alfa Laval CB10, Alfa Laval CB14, Alfa Laval CB16, Regulus DV193.
[5–50 kW] The compact SWEP E6 (E6T, E6TH) heat exchanger is extremely efficient and thus cost-effective: the front and rear plates provide stability and at the same time participate in heat exchange. Designed primarily for gas boilers (water heating, drinking water). Also suitable for solar collectors. Replacement for Regulus DV285.
[10–80 kW] The compact heat exchanger SWEP E8 (E8T, E8TH, IC8, IC8T, IC8TH) is used in some suspended condensing gas boilers. It is often an economical option instead of the more expensive version of SWEP B8. For solar systems or as a separating heat exchanger. Variants E8AS and E8LAS are designed mainly for DHW (domestic hot water): they have an asymmetrical arrangement of channels and thus achieve lower pressure losses for these applications. Also suitable as wort chiller. Replacement for Danfoss XB 05.
The SWEP B5 (B5T, B5TH) heat exchanger is used for small capacities in applications where space is tight. Also ideal as a water or oil cooler. In many applications, it can be fully replaced by the cheaper SWEP E5. Replacement for Alfa Laval AC16.
The SWEP B8 (B8T, B8TH) heat exchanger has small dimensions and is designed for smaller flows/capacities. It is easy to install and makes it universal for many water/water applications: heating (residentail units), small heaters (water/water), coolers, etc. It is built for high pressures and the asymmetric variant B8LAS (B8LASH) is suitable as a plate heat exchanger for heat pumps (condenser, evaporator). It is a replacement for Alfa Laval CB18, AC18, AC30, Danfoss XB 04, Danfoss XB 06. In many applications, it can be fully replaced by the cheaper SWEP E8.
[20–200 kW] The SWEP B10 (B10T, B10TH, IC10, IC10T, IC10TH) heat exchanger is suitable for single-phase applications (water/water). Also as a condenser for heat pumps or evaporators. It is a classic plate brazed exchanger for small outputs, or for smaller heat exchanger stations, DHW heating, etc. Replacement for Alfa Laval CB20, CB26, CB27, CB30, Danfoss XB 10.
The all-stainless steel version of the SWEP B10 heat exchanger does not use copper or nickel solder. It is used only in special cases when copper and nickel solder is subject to corrosion (from free iron, distilled or demineralized water, acids). Also suitable where the exchanger is exposed to high temperatures.
[10–300 kW] The SWEP B12 heat exchanger has larger ports and is thus adapted for large flows. Also suitable for steam or air. For smaller heating stations, hot water heating, etc. For optimal efficiency, it is available with H, L and M channel (SWEP B12H, SWEP B12L, SWEP B12MT). Replacement for Alfa Laval CB20, CB26, CB27, CB30, Danfoss XB 04, Danfoss XB 12.
[40–300 kW] The B16 series is specially designed for water/water applications. SWEP B16 (B16H, IC16) is suitable for heating and hot water (smaller heating stations), oil cooling, etc. Replacement for Danfoss XB 30.
SWEP B26H has an asymmetrical channel arrangement and is especially suitable as an R410A condenser for heat pumps. The B26FH version has no channels around the F3 port and is thus more resistant to freezing. Replacement for Alfa Laval AC40.
SWEP B25 (B25T, B25TH, IC25, IC25TH) serves a large range of capacities for water/water applications (1P-SC-S). SWEP B25 is suitable as a condenser (1P-SC-M) for higher capacities, for example for condensing units in refrigeration equipment, for heat pumps and so on. Replacement for Alfa Laval CB51, CB52, CB60, Danfoss XB 36, Danfoss XB 37.
[50–300 kW] The SWEP B28 series (B28H, IC28, IC28H) is used where B16 is not sufficient. Designed primarily for water/water applications. SWEP B28 is suitable for heating stations, DHW heating, heating. It is also suitable as a plate hydraulic oil cooler. Replacement for Alfa Laval CB51, CB52, CB60, Regulus DV503.
The SWEP V80 (V80H) evaporator is developed for a range of approximately 30 to 100 kW. This covers most industrial applications where an evaporator is required (air conditioning, refrigeration and freezing units, industrial refrigerators). Replacement for Alfa Laval AC70, AC72, AC73, AC74.
SWEP B80 (B80H) is designed for smaller refrigeration applications and for large heat pumps. It is mainly used as a condenser. It has lower pressure losses than B85H, B86H, so it is suitable for larger water flows. Replacement for Alfa Laval CB62, AC72, AC73, AC74.
The all-stainless steel version of the SWEP B80 heat exchanger does not use copper or nickel solder. It is used only in special cases when copper and nickel solder is subject to corrosion (e.g. from free iron, distilled or DEMI water, acids) or where the exchanger is exposed to high temperatures.
|All-stainless steel exchanger B80SH||Plates count||Price|
SWEP B85 (B85H) is a highly efficient heat exchanger for high performance. It is equipped with larger ports and designed for higher pressures than other exchangers. It is often used as a condenser for large heat pumps and larger refrigeration applications. Replacement for Alfa Laval CB62, AC112, AC120, AC220.
[50–600 kW] Size SWEP B35 (B35H, IC35, B35T, B35TH, B35TM) is ideal for many applications in district heating, heat recovery, heating, ventilation and air conditioning, combined heat and power, as an industrial oil cooler or steam heat exchanger. SWEP B35 is the perfect choice for efficient heat exchange with low pressure drop. Also available in a version with wider holes for use with large flow rates. Replacement for Alfa Laval CB110, CB112, Danfoss XB 51, Danfoss XB 52.
The SWEP B120 series (B120T, B120TH, IC120) was developed mainly for industrial applications where it is necessary to transfer high power in a water/water or water/oil system. SWEP B120T is also used as a condenser in refrigeration and air conditioning. Replacement for Alfa Laval CB76, CB77, Danfoss XB 59, Danfoss XB 61, Regulus DV800.
Series SWEP B50 (B50H, B50M, B50L, IC50) is used mainly in industrial applications and in heating stations, where it is necessary to transfer high power. Also as a steam exchanger (steam/water) or plate oil cooler (oil/water).
SWEP B427 series (B427H, B427M, B427L, IC427) is mainly used in industrial applications and in district heating stations where high power transmission is required. It is availabale in several versions: SWEP B427H, B427L, B427M, so the user can optimize performance and pressure losses. Replacement for Alfa Laval CB400, Danfoss XB 66.
Other plate heat exchangers from the SWEP catalogue, e.g. B56, B60, B57, B439 (replacement for Danfoss XB 70), B500 (replacement for Alfa Laval CB400), B65, DBD200 (replacement for Alfa Laval AC130, AC230, AC232, AC240), DBD400 (replacement for Alfa Laval AC250, AC350, AC500, AC502), DBD500 (replacement for Alfa Laval AC1000), V200TH etc. we value on demand.
|Gasketed heat exchanger ARES||Plates count||Price|
|ARES unit||replaces unit(s)|
replacesAlfa Laval M3, Danfoss XG10
replacesAlfa Laval TL3, Danfoss XGM032
replacesAlfa Laval AQ2, Alfa Laval M6, Danfoss XGM050
replacesAlfa Laval TL6
replacesAlfa Laval TS6
|ARES A4A, A4S||
replaceAlfa Laval AQ4
replacesAlfa Laval TL10
replacesAlfa Laval TS20
replacesAlfa Laval AQ6
replacesAlfa Laval AQ8
replacesAlfa Laval TS35